|
Product Details
Sony Xplod ZR Series 2/1 Channel Amplifier - XMZR1252/ 800W Max Power/ 170W x 2 RMS Into 2 Ohms/ Selectable 80Hz HPF/LPF/ 5-50kHz Frequency Response
Sony Xplod ZR Series 2/1 Channel Amplifier, Model XMZR1252
Features:
- 125W x 2 RMS (20Hz-20kHz, <1%THD+N, at 4 Ohm, 14.4V)1
- Maximum power output of 280W per channel at 4 Ohm.
- 170W x 2 RMS (20Hz-20kHz, <1%THD+N, at 2 Ohm, 14.4V)
- Maximum power output of 400W per channel at 2 Ohm.
- 340W x 1 RMS (20Hz-20kHz, <1%THD+N, at 4 Ohm mono, 14.4V)
- 800W x 1 max power at 4 Ohms This unit can be used as a bridging amplifier with a maximum output of 800W at 4 Ohms.
- High Level Input with Sensing Power On Direct connection (High Level Input) can be made with the speaker output of your car audio unit if it is not equipped with RCA line output. Hi-Level Sensing power On feature allows the unit to be activated without need for remote connection.
- Selectable HPF and LPF Built in selectable 12 dB/Oct 80Hz HPF and LPF.
- Bass Boost Variable 0-10 dB 40Hz bass boost provides additional bass response at lower frequencies.
Package Content:
- Mounting Screws (4)
- High Level Input Cord (1)
- Protection Cap (1)
Specifications:
- Amplifier Section
- Power Ad Hoc: 125W per channel at 4 Ohms from 20Hz-20kHz with < 1% THD1
- Audio
- Frequency Response: 5 - 50 kHz (+0/-3 dB)
- Harmonic Distortion: 0.01% (at 1kHz)
- Impedance: 2-8 Ohms Stereo or 4-8 Ohms Mono
- Input Level: 0.3 - 6.0V (RCA input) 1.2 - 12.0V (High Level Input)
- Low Boost: 0-10dB (40Hz)
- Power Supply: OTL Output Transformerless Circuit Pulse Power Supply
- Audio Features
- Level Control: High Level Input: 1.2 - 12V
- Inputs and Outputs
- Audio In: RCA Pin Jacks, High Level Input Connector
- Audio Out: Speaker Terminals
- RCA Audio Input(s): Pin Jacks: 0.3 - 6V
- Power
- Current Drain: At rated output:30A (at 4 Ohms) Remote Input: 1 mA
- Input Voltage: 10.5-16V Power Supply Voltage
- Internal Power Supply: OTL Output Transformerless Circuit Pulse Power Supply
- Output Power: Maximum Output: 280W x 2 (at 4 Ohm) 800W x 1 (at 4 Ohms)
- Power Requirements: 12V DC Car Battery (Negative Ground)
- Rated Output: 125W x 2 (20Hz-20kHz, 1% THD+N, 4 Ohms, 14.4V)1 170W x 2 (20Hz-20kHz, 1% THD+N, 2 Ohms, 14.4V) 340W x 1 RMS (20Hz-20kHZ 1.0% THD+N, at 4 Ohms)
- Speaker
- Speaker Terminal Type: Output
Approximate Dimensions:
- Height: 2.25"
- Width: 15.625"
- Depth: 10.125"
|
